A perfect match for limited budgets or as an additional machine in a busy die cutting center, the AccuCut MARK III Roller Die Cutting Machine will cut all mini, small, large and long cut dies. Optional tray is available for extra long cut dies. Simply turn the handle and roll through as many as two dies in a single pass.

The patented roller design makes cutting fast and easy without straining your hands. Simply turn the handle and roll through as many as five dies in a single pass. The roller pressure is pre-set so each cut is as easy as the first.

You save $5 when you buy the roller and tray together.

• The MARK III Roller Die Cutting Machine requires periodic replacement of the roller and die tray.
• The tray and roller last about one year with average use. With heavy use, they may need to be replaced more often.
• Replace die tray when cutting performance is diminished or if tray center bows either direction.
• Replace roller when it turns white.

• The MARK III Roller Die Cutting Machine requires periodic replacement of the roller and die tray.
• The roller lasts about one year with average use. With heavy use, it may need to be replaced more often.
• Replace roller when it turns white.

Save $5 when you buy the MARK III Roller/Tray Kit.

• The MARK III Roller Die Cutting Machine requires periodic replacement of the roller and die tray.
• The tray lasts about one year with average use. With heavy use, it may need to be replaced more often.
• Replace die tray when cutting performance is diminished or if tray center bows either direction.

Save $6 when you buy the MARK III Roller/Tray Kit.

Did you know your MARK III Roller Die Cutting Machine accommodates extra long cut dies? It's easy with the XLC die tray! When you want extra long borders or want to cut as many as three standard dies at once with your MARK III machine, this accessory makes it possible.

Place adapter in the base of an AccuCut MARK IV die tray to use with Sizzix® and Ellison® AllStar® dies. Also compatible with retired AccuCut Zip'eSlim dies.

This is a replacement roller safety shield for the MARK III machine.

Use the die pick to help remove any paper, chipboard or other material that may become embedded between the blades and foam on your die boards. This is more common with small and intricate shapes, especially when using thicker materials.

Keeping your dies free of embedded material will produce better cutting results.

This is a replacement User's Manual for the MARK III and MARK IV machines.

Download MARK IV and MARK III Machine User's Manual